Uluslararası Makaleler (SCI/SCIE)

2025-Yayınları

  • Erol, Y., Donmez, I., Katlav, M., Turgut, P., Turk, K. (2025). Loading rate effect on shear behavior of stirrupless RC beams with hybrid steel fiber. Structures (Vol. 82, p. 110473).
  • Aygün, M.,Aygün, Z. (2025). New Results on the Interaction of Radiation with Binary, Ternary, and Quaternary Mg Alloys, Evaluated Extensively in Applications of Electromagnetic Shielding. Journal of Materials Engineering and Performance, 1-13.
  • Katlav, M., Turk, K. (2025). Stacking ensemble models for data-driven intelligent modelling of compressive strength of sustainable recycled brick aggregate concrete (RBAC). Materials Today Communications, 113937.
  • Turk, K., Katlav, M., Bitkin, R. E. (2025). The use of high-volume hybrid steel fiber instead of compression rebar to improve the structural performance of high-strength SCC beams under bending. Construction and Building Materials, 470, 140521.
  • Elmastas, N., Adiguzel, F., Ustuner, M., Cetin, M., Alkan, A., Sahap, A. (2025). Determining climatic risks in the Eastern Anatolia region using the wind chill index, Türkiye. Air Quality, Atmosphere & Health, 1-12.
  • Gurel, M., Zomer, H., McFetridge, C., Murfee, W. L., McFetridge, P. S. (2025). Physiologically—Modeled Dynamic Stimulation and Growth Factors Induce Differentiation of Mesenchymal Stem Cells to a Vascular Endothelial Cell Phenotype. Microcirculation, 32(3), e70007.
  • Taşdelen, F., Dağtekin, İ. (2025). A numerical study on cooling performance of different type earth-air heat exchangers. Renewable Energy, 241, 122325.
  • Katlav, M., Ergen, F. (2025). Improved forecasting of the compressive strength of ultra‐high‐performance concrete (UHPC) via the CatBoost model optimized with different algorithms. Structural Concrete, 26(1), 212-235.
  • Tabar, M. E., Katlav, M., Turk, K. (2025). Explainable ensemble algorithms with grey wolf optimization for estimation of the tensile performance of polyethylene fiber-reinforced engineered cementitious composite. Materials Today Communications, 44, 112028.
  • Aygun, M., Aygun, Z., Ercan, E. (2025). Novel produced CoCrFeNiNbxWx and CoCrFeNiNbxTayMoy high-entropy alloys for radiation shielding applications. Journal of Materials Engineering and Performance, 34(15), 16693-16704.
  • Zeren Cetin, I., Adiguzel, F., Sandal, E. K., Dinc, Y. (2025). Enhancing bioclimatic conditions in urban open spaces through surface material selection: The case of adana (Turkey). Environment, Development and Sustainability, 1-16.
  • Taşdelen, F., İbrahim, A. Y. A. Z. (2025). Performance forecasts based on machine learning of geothermal heat exchangers. Applied Thermal Engineering, 127263.
  • Tabar, M. E., Sisman, Y. (2025). Deep learning-based modeling and prediction of GNSS time series: A comparative analysis of adaptive optimization algorithms. Advances in Space Research.
  • Aygün, M., Aygün, Z. (2025). Effect of gold nanoparticles in radiation therapy of breast tumor: photon, electron, proton, neutron, helium, and carbon ions irradiation. Radiological Physics and Technology, 1-18.
  • Aygün, M., Karabulut, E., Celik, F. A., Aygün, Z., Yilmaz, M., & Ercan, E. (2025). The self-nano mixer effect: about homogeneity of tungsten in WxTayCr5Ni5Fe5Mo5 alloy for radiation shielding. Physica Scripta, 100(5), 055944.
  • Katlav, M., Tabar, M. E., Turk, K. (2025). An intelligent framework for compressive strength prediction of eco-friendly SFR-RCAC: Base and stacked ensemble models combined with experimental verification. Construction and Building Materials, 489, 142367.
  • Katlav, M., Tabar, M. E., Turk, K. (2025). AI-guided design framework for bond behavior of steel-concrete in steel reinforced concrete composites: From dataset cleaning to feature engineering. Materials Today Communications, 42, 111286.
  • Katlav, M., Turk, K., Turgut, P. (2025). The impact of different length hooked‐end fibers on the structural performance of RC folded plates. Structural Concrete, 26(1), 179-196.
  • Katlav, M., Donmez, I., Kaygusuz, A., Turgut, P.,Turk, K. (2025). The workability, mechanical, and electrical properties of steel fiber‐reinforced SCC incorporating ultra‐fine copper slag as fine aggregate. Structural Concrete.
  • El, A. A., Yalçın, E.,Yılmaz, M. (2025). Investigation of the Effects of Porous Asphalt Mixtures Prepared with Different Modified Binders on the Performance Characteristics of Semi-Rigid Pavements. Turkish Journal of Civil Engineering, 36(5).

2024-Yayınları

  • Katlav, M., Ergen, F., Donmez, I. (2024). AI-driven design for the compressive strength of ultra-high performance geopolymer concrete (UHPGC): From explainable ensemble models to the graphical user interface. Materials Today Communications, 40, 109915.
  • Ergen, F., Katlav, M. (2024). Investigation of optimized machine learning models with PSO for forecasting the shear capacity of steel fiber-reinforced SCC beams with/out stirrups. Journal of Building Engineering, 83, 108455.
  • Ergen, F., Katlav, M. (2024). Machine and deep learning-based prediction of flexural moment capacity of ultra-high performance concrete beams with/out steel fiber. Asian Journal of Civil Engineering, 25(6), 4541-4562.
  • Joshi, V., Carter, D., Chen, A. E., Murphy, K., Higgins, J. W., Gurel, M., ... Brenner, D. A. (2024). Induction of MASH in three-dimensional bioprinted human liver tissue. PloS one, 19(12), e0312615.
  • Gurel, M., Rathod, N., Cabrera, L. Y., Voyton, S., Yeo, M., Ozogul, F.,Ozbolat, I. T. (2024). A narrative review: 3D bioprinting of cultured muscle meat and seafood products and its potential for the food industry. Trends in Food Science & Technology, 152, 104670.
  • Ergen, F., Katlav, M. (2024). Estimation of the shear strength of UHPC beams via interpretable deep learning models: comparison of different optimization techniques. Materials Today Communications, 40, 109394.
  • Katlav, M., Ergen, F. (2024). Data-driven moment-carrying capacity prediction of hybrid beams consisting of UHPC-NSC using machine learning-based models. Structures (Vol. 59, p. 105733).
  • Zhang, M., Yiğit, İ., Adigüzel, F., Hu, C., Chen, E., Siyavuş, A. E., ... Kaya, A. Y. (2024). Impact of Urban Surfaces on Microclimatic Conditions and Thermal Comfort in Burdur, Türkiye. Atmosphere, 15(11).
  • Cetin, M., Kaya, A. Y., Elmastas, N., Adiguzel, F., Siyavus, A. E., Kocan, N. (2024). Assessment of emergency gathering points and temporary shelter areas for disaster resilience in Elazıg, Turkey. Natural Hazards, 120(2), 1925-1949.
  • Katlav, M., Donmez, I.,Turk, K. (2024). Electrical resistivity of eco-friendly hybrid fiber-reinforced SCC: effect of ground granulated blast furnace slag and copper slag content as well as hooked-end fiber length. Construction and Building Materials, 438, 137235.
  • Aygun, M., Aygun, Z., Ercan, E. (2024). Newly fabricated cobalt and tungsten based alloys: Structural features and radiation protection potentials. Nuclear Engineering and Design, 428, 113490.
  • Katlav, M., Ergen, F., Turk, K.,Turgut, P. (2024). Investigating the applicability of deep learning and machine learning models in predicting the structural performance of V-shaped RC folded plates. Materials Today Communications, 38, 108141.
  • Turk, K., Katlav, M.,Turgut, P. (2024). Effect of rebar arrangements on the structural behavior of RC folded plates manufactured from hybrid steel fiber-reinforced SCC. Journal of Building Engineering, 84, 108680.
  • Katlav, M., Turgut, P.,Turk, K. (2024). A Novel Flexural Strain Measurement Setup for RC Beam Testing. Experimental Techniques, 48(6), 965-976.
  • Çiftçi, Y. S., Aygün, Z., Gecü, R. (2024). Annealing temperature-dependent microstructure, mechanical, and tribological properties of intercritically heat-treated dual-phase steel. Materials Research Express, 11(11), 116511.
  • Aygün, M., Aygün, Z., Celik, F. A., Karabulut, E.,Yilmaz, M. (2024). Theoretical and Molecular Dynamics Simulation Approaches to Praseodymium Content Effect on Radiation Shielding and Time Dependent Volume‐Collapse for a Newly Produced Borate Glass. Advanced Theory and Simulations, 7(10), 2400376.
  • Aygun, Z., Aygün, M. (2024). Reusing of Both Agricultural and Industrial Wastes as Replacement Materials for Construction Industry: Radiation Shielding Analysis. Roman. J. Phys., 69, 905.
  • Aygün, M., Aygün, Z. (2024). A comprehensive analysis of interaction with charged particles of Rene alloys. Radiation Effects and Defects in Solids, 179(9-10), 1074-1090.
  • Aygun, M., Aygun, Z., Ercan, E. (2024). Experimental features and radiation shielding performances of newly produced Ni-based superalloys. Radiation Effects and Defects in Solids, 179(5-6), 840-859.
  • Gungor, S., Sucu, F., Dinc, Y., Cetin, M., Deniz Adiguzel, A. (2024). GIS based daily tourism route proposal for surrounding provinces and districts from Ankara’s Çankaya district (Turkey). Environment, Development and Sustainability, 1-26.